I have been quite busy since the last update, but lets talk about my biggest stress… The budget!
I will try to follow with an eye candy post later in the weekend.
Budget
If I had a million dollars, this whole thing would be a lot easier. But as it is, I will need to borrow to make this home a reality, and that means carefully counting the cost. I finally got in enough quotes that I could complete my budget and get a pretty good total estimate. It was pretty high, at least relative to my early hopes. I got a bit depressed about it, but we crunched the numbers with the 4.25% interest rate that my loan officer says is likely, and it is still affordable on my salary, so we press on… But I will be looking to save money any way that I can.
Some people are really against having a mortgage… I don’t mind it too much as long as it is my only long term debt (credit cards and other bills are paid off each month) and the mortgage payments are better than rent would have been. It probably helps that my job (and income) is relatively stable.
Possible Budget cuts?
Windows?
The fancy eyebrow windows came back as about half my window cost. I could reduce that dramatically if I was willing to replace them with hand cut poly-carbonate (Lexan). 1/4 inch thick poly-carbonate sheets have a decent R value (considering they are transparent) and I can buy a 4×8 sheet for less than 100$, cut and install it my self… I have had this idea for a while, but seeing how everything has added up has really convinced me that it may be a good idea.
Poly-carbonate is fairly flexible, so I could actually curve the windows to match the curve of the walls. My only concern at the moment is that they are more than 8′ wide, so I will either need to find someone selling larger sheets or break each window up into segments, which will mean more difficult installation.
Basement?
Could I get rid of the unfinished basement? I have been tossing this idea around in my head for a while.
While it is true that a basement is a relatively inexpensive way to gain square footage, mostly because it is square footage that doesn’t need an additional roof, it does still need its own walls, floor, and ceiling. Even an unfinished basement needs electrical and plumbing and that also adds up. The suspended floor over the basement costs considerably more than the slab-on-grade floor that would be needed without the basement.
A basement also complicates the construction process with a much more difficult excavation, deeper drainage pipes, a more dangerous construction site, etc.
My specific design only called for a partial basement. I thought that would contain the extra cost to just the area of the basement, but because I have a sandy site, the engineer specified a slope of 1/2. This means that my 10 ft deep basement will effect the construction for 20 ft around. I will need much more expensive “step footings”, taller stem walls, two levels of french drains, and probably other things that I have not thought of yet.
The egress window on the North side of the house is causing difficulty with earth sheltering because I need to be a lot more careful about retaining the earth. It looked good in 2D, but now that I am looking at it in 3D, I am a bit more concerned about the scale and cost of the retaining walls that will be required to keep earth from spilling into the basement.
My wife was mostly wanting the basement for storage, but I could more cheaply add a few feet to the length of my garage to make up for that. I wanted the basement for the placement of the mechanical room. If we got rid of the basement, we could use the location of the basement stairs as a main floor mechanical room, but the central location under the rotunda was important for my passive HVAC design. And after many years without a basement, Sherri and I both liked the idea of extra “unfinished” space down there to grow into…
You can’t come back and decide to add a basement later. You need to make that decision from the start of the building process. On the other hand, as Sherri pointed out, the storm room at the top of the tower is pretty superfluous and we could just decide to leave it off if we ran out of money. We could also come back and add it later if money became available, so maybe that is the best place to cut?
For now, I think we are going to wait to hear what the banker says about how much they will loan us and then decide what to do.
Sweat Equity
It seems like a number of the tasks are coming in with only ridiculous quotes… Some, like the precast ribs, the garage Quonset hut and the insulating “umbrella”, I always planned to do myself. But as I get quotes back, I am picking up more and more of the other tasks. I now expect to do much of the steel work myself (hopefully with a little help from my friends and family), along with a number of finishing tasks. Sherri is very concerned that I am taking on too much and that this could stretch out the build and wear me out… It could also be a great exercise program (I spend too long sitting and typing at my “computer job”). I also feel a bit like a kid who is getting a new giant sand box, I can’t wait to get out there and play… But it could get old after a few months, and I am not as young as I used to be… Something to keep in mind.
Smart little improvements to the plan
There are a number of smart little ways I could improve the plan to save money. For instance, The people who bend my steel arches charge by the bend, not by the length of the material. Instead of ordering a number of 90 degree bends for my apses, I plan to switch to ordering half as many 180 degree bends that I will cut in half.
I also noticed that there are a few spots where I can make a small layout adjustment and save a lot of structure. I will talk about that more next time I show pics from my virtual build.
Water isn’t very expensive
I had liked the idea of buying a 1000 gallon water cistern and installing it between the house and the garage. It could catch the roof run off and be used for watering the garden. The problem with many “green” ideas is that they don’t actually make financial sense. As I have mentioned before, I live in the Great Lakes basin where water is always plentiful (we have more than 20% of the worlds fresh water in our basin). At current electric rates, it only costs me about 25 cents to pump a thousand gallons from my well. See the calculation here. The thousand gallon tank costs nearly $800, but it would be double that by the time it was installed. There is also the risk that it would break down or become polluted… I would hate to look at my investment and know that, even full, it was only worth 25 cents, so lets skip it.
I also liked the idea of solar hot water. But I checked my current bills and I only pay about 20$ a month to heat my hot water. A decent vacuum tube solar array with the storage tank, pumping station and other odds and ends easily comes to $6000, plus installation. At 20$ a month, it would take 25 years to pay off that investment. Plus, it is not exactly attractive on my green roof.
I will set things up to install a solar hot water system some day, but not as part of the construction cost. Perhaps I will eventually be able to build my own for a lower cost.
As for the urinal in the boys bathroom… It may not have a rapid payback due to our cheap well water, but the total cost is not high, so I think I will keep that one ;^)
HVAC is expensive
My HVAC quotes came in. I knew that Geothermal was expensive, from the buried heat exchange tubes to the unit that goes in your house, they are expensive. But I had a nice back up plan to use the electric (in demand) mini boiler instead. With its much lower cost and much easier install (no loop field required), I thought it would save enough money to justify the higher operating costs. Due to the Federal Tax Rebate for Geothermal, it didn’t turn out that way. I put some info about my HVAC sourcing here.
However, the quotes are still very high, so I may take on the easy parts of the job myself. For instance, I may be able to save money if I install the radiant floor tubes myself. I am still thinking about it.